Stand Up Paddle Boards – A Review Of SUP Board Shapes – There are numerous types of stand up paddle board shapes on the market today. We will explore the key SUP board shapes and discuss their purpose and performance.

Are you currently searching for a Fully Stand Up Paddle board? Perhaps you have finally decided to provide the new sport a shot but still have a few questions about the many different board options? Perhaps you have graduating from Paddle Board and searching for a second purpose specific board? Let’s look into the many shape available options today on the SUP market.

Here are the essential varieties of fully stand up paddling that are presently popular:

* Recreational flat-water Paddling

* Paddle Surfing

* Flat Water Racing

* Downwind Paddling

* Touring Paddle Boards

* River/Rapid Paddling

Throughout SUP shapes – Many stand up paddle boards that focus on the 1st time or casual paddler will fall under the “All-around” category. Throughout shapes can be used for all the aforementioned kinds of paddling to greater or lesser extents even though they are most suitable for Recreational flat-water paddling. An All Around SUP board will usually be around 30″ wide if not wider. Typical lengths for any beginner are 11′ -12′. Lighter riders might be able to begin a 10′ – 10’6″ board. Throughout boards usually include a fairly wide nose and tail as well as considerable overall thickness in the 4 1/2″ to 5″ range. The wide nose, wide tail and considerable length, width and thickness result in an extremely stable and forgiving board. Stable and forgiving are great characteristics to get in Inflatable Gym Mat while learning the basics of balance, paddling, wave negotiation, wave riding as well as building your overall strength and conditioning. Many Throughout shapes will even come with a single center fin configuration.

While many may feel the need to leap directly into a performance shape there is lots of wisdom in getting started upon an all-around shape and graduating over time to a more performance tailored shape. Plus after you have graduated you will have a second board to loan for your girlfriend/boyfriend, wife/husband or friends. When you purchase wisely you can get a board that will assist you to progress from flat-water basics and will also enable you to paddle surf in waves, test out the flat water racing scene, enjoy an SUP tour and navigate rivers and small rapids. Here is a good example of what could be the first “All Around” production board originally aptly named the Jimmy Lewis – Throughout though it is currently called the “Cruise Control”. Other “Throughout” boards available include the Hovie – Grand Sport, Hovie – LCSUP, Coreban – Cruiser, King’s – King Model, Siren Sojourn, SUPatx and SurfCore.

Paddle Surfing Shapes – Operate Paddle Surfing has progressed in leaps and bounds as board shapes and riders have pushed the limits of performance. You can find multiple styles of SUP surfing that connect with preference and wave size. Some choose to “rip” and “shred” on the smaller board keeping their feet in relatively exactly the same position on the board, others would rather “walk” the board from nose to tail in a more traditional although no less skilled manner. All these varied styles are typically however, not exclusively performed on different board shapes.

When it comes to learning to paddle surf an “Throughout” shape is generally a a fit condition to start out on especially in smaller surf. The additional stability will allow you to paddle into the wave with confidence as well as the length can help your glide when your gain speed to get in the wave. Once on the wave an Throughout shape will be really stable underneath the feet.

While bigger is normally considered better for first-time paddlers you might want to consider a smaller board for surfing. You will likely need a board which is no more than possible yet still be stable enough that you should balance on. In case you are headed for your surf you might like to borrow a somewhat smaller board from the friend when possible and give it a shot.

Nose Riders: Much like an all around shape a nose rider shape meant for paddle surfing could have a relatively wide nose for hanging “five” or “ten” of your toes from the edge. The tail can be a selection of shapes which may include, square, squash, round, or pin tail. A SUP nose riding board specific for surfing may have much narrower tapered rails and it’s nose thickness is going to be less. The tail will often be thinner also to allow it to be buried into the waves during turns. Other maneuvers might include “backward takeoffs” that are done by paddling the board backwards in to the wave and spinning the board around 180 degrees when you catch the wave and “helicopters” with are essentially a 360 degree turn initiated while nose riding. A few examples of great Nose riding SUP shapes are the Jimmy Lewis – Striker, Coreban – Icon, King’s – Knight Model and Siren – Sojourn.

Rippers: SUP boards sometimes called “rippers” are essentially blown up short board shapes that allow the paddle surfer to transform faster, drop-in on steeper waves and negotiate barrels with greater ease. Typical “Ripper” shapes have a pointy nose and pulled-in tail and have a 3 fin “thruster” or 4 fin “Quad” setup. Sizes are typically within the sub 7 foot to 10 foot range. A common dimensions are 9′ to 9’6″. Some good examples of “Ripper SUP” shapes would be the Coreban – Performer, Coreban – Nitro, Jimmy Lewis – Mano and Kings – WCT Model.

Big Wave Boards: Big wave boards need to be able to be paddled quickly enough to capture a quick moving wave. Once as much as speed a big wave board needs to be able to have the drop and turn at high speeds whilst keeping it’s rails in touch with the wave. Typical big wave boards are usually in the 11′ to 13′ range and be thinner in width than a normal board with very pulled in point nose as well as a pin tail. Typical fin configuration is definitely the 3 fin “thruster”. An illustration of this a big wave gun SUP is definitely the Jimmy Lewis – Bombora.

Flat Water Racing Boards: Racing boards are made to allow the paddler to move from the water extremely fast, using the least amount of resistance. Typical widths of any racing board will likely be from 27″ to 30″ wide with thickness in the 4.5″ to 5.5″ range. Although race boards come in many lengths there are some standard lengths that conform to official race event classes. These classes include: Stock 12’6 and under, 14′ and under and “Unlimited which may include boards 14’1″ and also over. Race boards usually will have got a narrow nose and tail. Many boards will also feature a displacement hull which can be basically a deep vee nose running into a rounded bottom. Displacement hulls generally master rougher ocean conditions. The displacement hull design is similar to many boat hull designs. Other variations of race boards could have a little vee in the nose and can feature a flatter bottom that carries out to more square rails. The flatter bottom designs tend to be more favorable for very flat and calm water race conditions. Some boards specifically in the 14′ 1” as well as over lengths will come with a rudder that can be controlled or “trimmed” from your foot while paddling. Race regulations only allow rudders on the 14′ 1″ as well as over “Unlimited” Class. This can be very helpful when facing cross winds that normally could just be counterbalance by paddling on one side. Trimming with your rudder will help you to paddle even strokes on both sides preventing fatigue on a trip inside your desired direction. Examples of zzunia boards range from the Jimmy Lewis – Slice, Coreban – Alpha Race 12’6″, Coreban – Alpha Race 14′, Nah Skwell – Race and Hovie – Comet.

Downwind Paddling: Downwind Paddling includes paddling with the wind typically from point A to B. In the ocean it really is easy to catch open ocean swells that allow the paddler to ride the wave for short distances. When a wave is caught the paddler can rest for a few seconds and adjust their directional course before paddling again into another wave or “runner”. In this fashion the paddler can travel great distances at impressive average speeds. Downwind boards are generally within the 12’6″ to 18″ range. They feature narrow widths inside the 27″ to 30″ range, have pointed nose profiles, and pulled in tails. Downwind boards typically have a fair quantity of nose rocker that allow them to drop into the trough of waves minus the nose “pearling” or going underwater. The base of the boards are usually flat with fairly sharp rear rails allowing them to ride the waves and alter direction easily if necessary. Samples of this type of Inflatable Floating Platform range from the Coreban – Alpha Race 12’6″ and Jimmy Lewis – Albatross.

Paddle Board – Why Is This Significant..

Leave a Reply

Your email address will not be published. Required fields are marked *

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.