You may have seen those perfectly edged lawns, and now you want one. The only question is how to get that perfect edge that you have seen all over the place, and what equipment you need to achieve that edge.
There are a variety of tools you can use to have that perfect edge. You can find hand operated shears nearly the same as scissors that can be used for trimming. These shears needs to be used for trimming only and never for shearing. I only mention this because electric and gas-powered trimmers could be used to edge. To prevent any misinterpretations, I am just pointing out that just the electric and gas-powered trimmers are appropriate for edging and not the hand operated scissors-like trimmers. It is sometimes possible to edge very small lawns by using these hand operated trimmers, however it is not easy and must probably be avoided when there is one other way.
String and blade trimmers can be used edgers also. These trimmers may be electrical or gas-powered. The electrical trimmers have extension cords that really must be plugged into the wall. These electric trimmers are clearly not ideal, as there are recommended maximum distances for your extension cords. In addition to this, there is also to be extremely aware of in which the cord is constantly to be sure that you do not accidentally cut the cord with all the trimmer’s blade. The gas-powered trimmer can also work as an edger and really should more likely be used on the electric trimmer in the event the options are involving the two, though both could be damaged by and cause damage to concrete, decks, or patios making neither of these perfect for edging.
An effective way to edge is to buy an edger designed for edging. You will find different kinds of edgers, but the most common ones are most often the rotary edger and also the turf edger. Both cut vertically, since they are both created to edge lawns. Additionally it is a good idea to edge and trim your lawn prior to deciding to mow your lawn. This may enable the mower to pick up the clippings left over through the edger or trimmer.
There is something called permanent edging. Permanent edging can help the lawn significantly by helping the lawn keep its shape and through reducing maintenance by keeping mulch and/or groundcovers from infiltrating your lawn. Preformed edging can also help to minimize damage caused for your lawn by foot traffic, car tires, etc.
There are numerous edging options available including plastic, wood, decorative concrete, and even metal. Whenever you edge, edging could be flushed or aboveground. Aboveground edging is usually decorative and anchored in the ground. It offers two main services. It prevents stones and the like from scattering on the lawn, which is great looking.
You will find obviously advantages and disadvantages to the aboveground edging. For instance, wood may rot and smell, but wood is light and simple to do business with. Bricks and cement tend to be heavier and a lot more difficult to do business with, however are much more durable than wood, and typically may last for a a lot longer time. Ties and stones are durable and easy to work with making them a great choice for aboveground edging. However, these are tough to use on slopes or curves and they are therefore not nice if you prefer a uniform presentation.
There is another sort of edging called flush edging. Flush edging is in fact sunk in to the ground with merely the very top of it showing higher than the ground’s surface. These edging are very beneficial to making clear division borders, nevertheless they is definitely not so effective at drawing attention away from the borders. The plastic rolls of flush edging are incredibly easy to do business with, relatively inexpensive, and rather simple to install causing them to be a good choice for flush edging, however they more than likely must be reinforced occasionally ddldgb the ground slowly moves.
One more thing to be aware of when edging is the fact after excessive rain, the ground is normally swollen with moisture. If you decide to install edging after excessive rainfall, the edging will potentially move around if the ground dries. This could give your lawn an uneven look. Therefore, after excessive rainfall, it really is best not to edge up until the ground has dried.
You can find five basic steps to edging:
1. Lay out a line. Stakes and strings are some of the best tools if you’re creating a straight line. Your backyard hose is one of the a smart idea to are trying to edge on a curve.
2. Cut the turf about 2 ” wide and about five inches deep. These numbers will obviously vary with all the specific edging project.
3. Then add sand at the bottom of the trench, then set the edging into the trench evenly.
4. Fill sand into the base of the trench to achieve your desired height for the edging, and then fill out both sides with topsoil.
5. Walk over the edging to firm down the soil across the edging. This helps to help keep the edging in place.